DupliColor presto Starting Spray (400ml)

SKU: 65-306413
GTIN: 4052800306413
HAN: 306413
Category: miscellaneous
Manufacturers:

7,52 €

18,80 € per 1 l

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

presto Starting Spray provides fast-action ether-based assistance for combustion engine ignition problems. The extremely ignitible composition allows a quick start. Simply spray in the engine suction filter.

For use on:
Combustion engines of all kinds e.g. car, bicycles, lorries, vans, chain saws, trimmers, tractors, diesel engines and gas engines

Quality and Properties

Easy application
Ether, propane and butane mixture
Fast acting
Misty spray
TRG 300 compliant

Physical and Chemical Data

Basis: Diethylether and mineral oil
Colour: transparent
Smell: characteristic
Relative density at 20°C: 0.711 g/ml
Yield: 1.70 g/sec.
Vapour pressure at 20°C: 3 - 4 bar
Flash point: -40°C
Explosion limit: Lowest 1.7 Vol%, Highest 36 Vol%
Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size: aerosol can, maximum nominal volume 400 ml

Environment and Labelling

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using Instructions

Before use, carefully read and observe the warning texts on the label!

Application:

Bring the can to room temperature.
Shake can for 2 minutes before use.
Spray presto Starting Spray for a few seconds in the air filter inlet.
Then, start the engine immediately.
For petrol engines – keep foot on the accelerator during ignition.
For diesel engines – start the engine and leave running.
In very cold conditions, continue to spray for a few seconds after ignition.
Do not use with preheat spirals or candles or other preheat devices.

Content:	0,40 l

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Question about item

Your question